Influences on the design and style of nineteenth century furniture are characterized by three primary factors. To begin with, there was historical revivalism of a style which had been very popular in the past. Often times, the cumulative effect from a piece of revival furniture were that of a reproduction of a piece or style from the previous times; but then there were other times when antique elements were exercise on a form of a totally different style. Nonetheless, historical revivalism managed to survive in one manner or another throughout the entire century.
During the middle of the century and all the way through to its end, there were particular designers who suggested a break with revivalism. These men ushered in the second factor of progressive tendencies in furniture design. The furniture created during this period was thought to be free from revival decoration, and in other instances it exhibited traits of mechanical or technical innovation. The third major influence on nineteenth century furniture was the utilization of new materials in design and construction. Although earlier furniture makers had occasionally used materials other than wood, the nineteenth century saw an increase in the use of such materials as iron, wire, tubular metal, and different organic substances such as cane, rattan, animal horn, etc. However, historical revivalism, in its various aspects, was the predominant influence during the century.
The first revival style which became important at the beginning of the nineteenth century was the Classical. This was a style based on decorative motifs and actual furniture forms of ancient Greece and Rome. Since the furniture of nineteenth century America was still greatly influenced by taste in England and Prance, it might be well to summarize movements in these countries which were important in developing the Classical style.
As early as 1730 the English architect William Kent had begun to apply such Classical devices as Greek keys and egg-and-dart moldings to Baroque furniture. The furniture form did not change in any way, since the innovation was merely application of alien devices to the surface of the piece. This step was the very first in the development of the Classical design and was mimicked by several other designers in both England and France until around 1760. The second step was the creation of a straight leg that was carved, which was a stark contrast to the curvilinear lines of the famous Rococo design.
Another English architect, Robert Adam, has sometimes been given credit for developing this innovation about 1765. But there is some evidence that the straight leg was also in use in France at about that time. The ideas of Adam were translated into furniture designs by George Hepplewhite in his Cabinet-Maker and Upholsterer Guide in 1788 and Thomas Sheraton in his The Cabinet-Maker and Upholsterer Drawing-Book around 1791. These books were a dominant influence in disseminating this phase of the Classical style. The third development in the creation of the Classical style was the copying of actual Greco-Roman furniture forms. The two forms most often copied were a chair form called klismos and a bench and chair form called curule. The klismos form is composed of a horizontal solid cresting piece that supports the back with the front and rear legs, flaring outward in a saber line. The curule is the familiar X-shaped support that meets with the top of the bench and supports it on the floor.
These archaeological designs were utilized by two French designers, Charles Percier and Pierre P. L. Fontaine, who in 1801 published an assortment of plates in this style that was known as Recueil de Decorations Interieures. These two men were mainly responsible for developing what is known as the Empire Design; at the time when Napoleon Bonaparte forged his Empire in 1804, he annointed Percier and Fontaine as his court decorators. Some of the Greco-Roman motifs that popped up in their crations were acanthus leaves, cornucopias, swans, eagles, dolphins, and monopodia which is an assortment of animal head and leg into a one element.
The furniture and rooms shown in the Recueil were intended only for the wealthiest patrons. The furniture was made of mahogany and rosewood and elaborately decorated with ormolu mounts; it was massive and cubical in character. The Napoleon campaign in Egypt made popular another set of ancient decorative motifs that were incorporated into the Empire style. The massive solidity of Egyptian design was reflected in many furniture forms, and such motifs as the lotus, sphinx, hawk, and hieroglyphics were used as decorative detail.
In 1830, when the Bourbon Restoration was finished, the spirit of the Empire was still very much alive and well in the world of cabinetmaking. While the heaviness was still present, many of the Restoration and Charles X furniture pieces were relieved of its ormolu detail. Fruitwoods began to replace mahogany as favorites. The gondola chair, a modification of the klismos type in which the back was closed in, was popular in the Restoration and Louis Philippe periods. - 16492
During the middle of the century and all the way through to its end, there were particular designers who suggested a break with revivalism. These men ushered in the second factor of progressive tendencies in furniture design. The furniture created during this period was thought to be free from revival decoration, and in other instances it exhibited traits of mechanical or technical innovation. The third major influence on nineteenth century furniture was the utilization of new materials in design and construction. Although earlier furniture makers had occasionally used materials other than wood, the nineteenth century saw an increase in the use of such materials as iron, wire, tubular metal, and different organic substances such as cane, rattan, animal horn, etc. However, historical revivalism, in its various aspects, was the predominant influence during the century.
The first revival style which became important at the beginning of the nineteenth century was the Classical. This was a style based on decorative motifs and actual furniture forms of ancient Greece and Rome. Since the furniture of nineteenth century America was still greatly influenced by taste in England and Prance, it might be well to summarize movements in these countries which were important in developing the Classical style.
As early as 1730 the English architect William Kent had begun to apply such Classical devices as Greek keys and egg-and-dart moldings to Baroque furniture. The furniture form did not change in any way, since the innovation was merely application of alien devices to the surface of the piece. This step was the very first in the development of the Classical design and was mimicked by several other designers in both England and France until around 1760. The second step was the creation of a straight leg that was carved, which was a stark contrast to the curvilinear lines of the famous Rococo design.
Another English architect, Robert Adam, has sometimes been given credit for developing this innovation about 1765. But there is some evidence that the straight leg was also in use in France at about that time. The ideas of Adam were translated into furniture designs by George Hepplewhite in his Cabinet-Maker and Upholsterer Guide in 1788 and Thomas Sheraton in his The Cabinet-Maker and Upholsterer Drawing-Book around 1791. These books were a dominant influence in disseminating this phase of the Classical style. The third development in the creation of the Classical style was the copying of actual Greco-Roman furniture forms. The two forms most often copied were a chair form called klismos and a bench and chair form called curule. The klismos form is composed of a horizontal solid cresting piece that supports the back with the front and rear legs, flaring outward in a saber line. The curule is the familiar X-shaped support that meets with the top of the bench and supports it on the floor.
These archaeological designs were utilized by two French designers, Charles Percier and Pierre P. L. Fontaine, who in 1801 published an assortment of plates in this style that was known as Recueil de Decorations Interieures. These two men were mainly responsible for developing what is known as the Empire Design; at the time when Napoleon Bonaparte forged his Empire in 1804, he annointed Percier and Fontaine as his court decorators. Some of the Greco-Roman motifs that popped up in their crations were acanthus leaves, cornucopias, swans, eagles, dolphins, and monopodia which is an assortment of animal head and leg into a one element.
The furniture and rooms shown in the Recueil were intended only for the wealthiest patrons. The furniture was made of mahogany and rosewood and elaborately decorated with ormolu mounts; it was massive and cubical in character. The Napoleon campaign in Egypt made popular another set of ancient decorative motifs that were incorporated into the Empire style. The massive solidity of Egyptian design was reflected in many furniture forms, and such motifs as the lotus, sphinx, hawk, and hieroglyphics were used as decorative detail.
In 1830, when the Bourbon Restoration was finished, the spirit of the Empire was still very much alive and well in the world of cabinetmaking. While the heaviness was still present, many of the Restoration and Charles X furniture pieces were relieved of its ormolu detail. Fruitwoods began to replace mahogany as favorites. The gondola chair, a modification of the klismos type in which the back was closed in, was popular in the Restoration and Louis Philippe periods. - 16492
About the Author:
Whether need an antique furniture price guide, or you are just looking for a great online antique mall, give us a visit. You'll be glad you did.
